Acrob06: Rozdiel medzi revíziami
Z SensorWiki
(Nová stránka: Predošlá úloha... | Späť do menu | Pokračovanie...) |
|||
Riadok 1: | Riadok 1: | ||
− | [[ | + | Použijeme ten istý senzor ako v predošlej úlohe, len si ukážeme jeho využitie v digitálnom |
+ | režime. Úlohu rozhodovacieho prvku za nás prevezme vstupný komparátor mikroprocesora. | ||
+ | |||
+ | Vyskúšajte tento program: | ||
+ | |||
+ | <source lang="c"> | ||
+ | #define LED_Yellow 13 // select the pin for the LED | ||
+ | #define SENSOR 3 | ||
+ | |||
+ | long val = 0; // variable to store the value coming from the sensor | ||
+ | |||
+ | void setup() | ||
+ | { | ||
+ | pinMode(LED_Yellow, OUTPUT); // declare this pin as an OUTPUT | ||
+ | pinMode(SENSOR, INPUT); // declare this pin as an INPUT | ||
+ | |||
+ | Serial.begin(9600); | ||
+ | |||
+ | Serial.println("Test started \n"); | ||
+ | digitalWrite(LED_Yellow, HIGH); // make it visible | ||
+ | delay(1000); | ||
+ | } | ||
+ | |||
+ | |||
+ | void loop() | ||
+ | { | ||
+ | val = digitalRead(SENSOR); // read the value from the sensor | ||
+ | Serial.print("Sensor = "); | ||
+ | Serial.println(val, BIN); | ||
+ | delay(200); | ||
+ | } /* End of Loop */ | ||
+ | |||
+ | </source> | ||
+ | |||
+ | |||
+ | [[Acrob05|Predošlá úloha...]] | [[Acrob|Späť do menu]] | [[Acrob07|Pokračovanie...]] |
Verzia zo dňa a času 21:23, 26. apríl 2010
Použijeme ten istý senzor ako v predošlej úlohe, len si ukážeme jeho využitie v digitálnom režime. Úlohu rozhodovacieho prvku za nás prevezme vstupný komparátor mikroprocesora.
Vyskúšajte tento program:
#define LED_Yellow 13 // select the pin for the LED
#define SENSOR 3
long val = 0; // variable to store the value coming from the sensor
void setup()
{
pinMode(LED_Yellow, OUTPUT); // declare this pin as an OUTPUT
pinMode(SENSOR, INPUT); // declare this pin as an INPUT
Serial.begin(9600);
Serial.println("Test started \n");
digitalWrite(LED_Yellow, HIGH); // make it visible
delay(1000);
}
void loop()
{
val = digitalRead(SENSOR); // read the value from the sensor
Serial.print("Sensor = ");
Serial.println(val, BIN);
delay(200);
} /* End of Loop */