LCD displej EA-DOGM 163: Rozdiel medzi revíziami

/*
 *  lcd.h  Library for MISA @ FEI STU
 *
 *  Created: 21. 4. 2024 19:31:48
 *   Author: Richard Balogh based on gitHub code for EA*DOGM163
 */ 

#ifndef LCD_H_
#define LCD_H_

#include <stdlib.h>
#include <util/delay.h>
#include <avr/interrupt.h>
#include <avr/pgmspace.h>

#define CHARACTER_BUFFER_BASE_ADDRESS 0x80
#define CHARACTERS_PER_ROW 16

#define DISPLAY_RS_PORT PORTD
#define DISPLAY_RS_DDR DDRD
#define DISPLAY_RS_PIN 2
#define DISPLAY_CSB_PORT PORTD
#define DISPLAY_CSB_DDR DDRD
#define DISPLAY_CSB_PIN 4

#define DISPLAY_BKLT_PORT PORTD
#define DISPLAY_BKLT_DDR DDRD
#define DISPLAY_BKLT_PIN 6

#define DISPLAY_RS_low   (DISPLAY_RS_PORT &= ~(1<<DISPLAY_RS_PIN))
#define DISPLAY_RS_high  (DISPLAY_RS_PORT |= (1<<DISPLAY_RS_PIN))

#define DISPLAY_CSB_low  (DISPLAY_CSB_PORT &= ~(1<<DISPLAY_CSB_PIN))
#define DISPLAY_CSB_high (DISPLAY_CSB_PORT |= (1<<DISPLAY_CSB_PIN))

#define DISPLAY_BKLT_low   (DISPLAY_BKLT_PORT &= ~(1<<DISPLAY_BKLT_PIN))
#define DISPLAY_BKLT_high  (DISPLAY_BKLT_PORT |= (1<<DISPLAY_BKLT_PIN))


//instructions (see the ST7036 instruction set for further information)
#define INSTRUCTION_CLEAR_DISPLAY    		0b00000001
#define INSTRUCTION_FUNCTION_SET_INIT_0  	0b00110011
#define INSTRUCTION_FUNCTION_SET_INIT_1  	0b00110010
#define INSTRUCTION_FUNCTION_SET_INIT_2  	0b00101001
#define INSTRUCTION_INSTRUCTION_SET_0    	0b00101000
#define INSTRUCTION_INSTRUCTION_SET_1 		0b00101001
#define INSTRUCTION_BIAS_SET				0b00010101
#define INSTRUCTION_POWER_CONTROL 			0b01010011
#define INSTRUCTION_FOLLOWER_CONTROL		0b01101100
#define INSTRUCTION_CONTRAST_SET			0b01111111
#define INSTRUCTION_DISPLAY_ON				0b00001100
#define INSTRUCTION_ENTRY_MODE 				0b00000110

void lcd_init(void);
void lcd_write( char data );
void lcd_data( char data );     
void lcd_command( char instruction );

void lcd_putc( char znak );
void lcd_puts( char *string );

void lcd_clear( void );
void lcd_clearline( unsigned char zeile );

void lcd_setCursor(char row, char col);
void lcd_bklt( char OnOff);


#endif /* LCD_H_ */

#include "lcd.h"
#include "uart.h"

/* Primitivne funkcie, nepredpoklada sa ich vyuzitie uzivatelom */

/* Funkcia zapise jeden bajt po SPI zbernici do zariadenia */
void lcd_write( char data )
{
 signed char index = 8;
        char c_data;

 clear_bit(DISPLAY_CSB_PORT,DISPLAY_CSB_PIN); 	// Chip-Select do log.0
 c_data = data;

 do
 {
  _delay_us(6);
  if ( c_data & 0x80 )		// najyssi bit zamaskujeme 
	set_bit(PORTB,3);		// a posleme ho na zbernicu
  else
	clear_bit(PORTB,3);     // cez vodic MOSI (alebo len SI)
  _delay_us(5);			    // a vygenerujeme jeden hodinovy pulz
    clear_bit(PORTB,5);     // na vyvod CLK
  _delay_us(6);
	set_bit(PORTB,5);    
	
   c_data = c_data << 1;    // na najvyssie miesto posunieme dalsi bit
   index--;

  } while (index > 0);    // a toto spravime dokola 8x

	                        // a napokon zdvihneme /CS do log.1
	_delay_ms( 2 );
	set_bit(DISPLAY_CSB_PORT,DISPLAY_CSB_PIN);   
}


/* Funkcia zapise jeden byte do riadiaceho (Control) registra */
void lcd_command( char instruction )
{
	clear_bit(DISPLAY_RS_PORT,DISPLAY_RS_PIN);
	_delay_us( 1 );
	lcd_write( instruction );
}


/* Funkcia zapise jeden byte do datoveho (Data) registra */
void lcd_data( char data )
{
	set_bit(DISPLAY_RS_PORT,DISPLAY_RS_PIN);
	_delay_us( 7 );
	lcd_write( data );
}


/* Uzivatelske funkcie, ktore ma pouzivat uzivatel */



/* Inicializacia displeja podla datasheetu pre radic ST7036 */
void lcd_init(void)
{  
	
              DDRB |= (1<<PB3) | (1<<PB5);	   // MOSI + SCK as OUTPUTs
    DISPLAY_RS_DDR |= 1<<DISPLAY_RS_PIN;       // All signals as OUTPUT
   DISPLAY_CSB_DDR |= 1<<DISPLAY_CSB_PIN;
  DISPLAY_BKLT_DDR |= 1<<DISPLAY_BKLT_PIN;
	
     	
  set_bit(PORTB,5);                            // set_bit( ST7036_CLK );
  set_bit(DISPLAY_CSB_PORT,DISPLAY_CSB_PIN);   // set_bit( ST7036_CSB );
  clear_bit(DISPLAY_RS_PORT,DISPLAY_RS_PIN);   // set_bit( ST7036_CSB );
  
  _delay_ms(50);		// pockame viac ako 40ms na ustalenie napajacieho napatia

   lcd_command( 0x39 );	// Function set; 8-bit Datenlänge, 2 Zeilen, Instruction table 1
  _delay_us(50);		// mehr als 26,3µs warten

  lcd_command( 0x1d );	// Bias Set; BS 1/5; 3 zeiliges Display /1d
 _delay_us(50);		// mehr als 26,3µs warten

  lcd_command( 0x50 );	// Booster aus; Kontrast C5, C4 setzen /50
 _delay_us(50);		// mehr als 26,3µs warten

  lcd_command( 0x6c );	// Spannungsfolger und Verstärkung setzen /6c
 _delay_ms( 500 );	// mehr als 200ms warten !!!
 
  lcd_command( 0x7c );	// Kontrast C3, C2, C1 setzen /7c
 _delay_us(50);		// mehr als 26,3µs warten

  lcd_command( 0x38 );	// Display EIN, Cursor EIN, Cursor BLINKEN /0f
 _delay_us(50);		// mehr als 26,3µs warten

  lcd_command( 0x0f );	// Display EIN, Cursor EIN, Cursor BLINKEN /0f
  _delay_us(50);		// mehr als 26,3µs warten

  lcd_command( 0x01 );	// Display löschen, Cursor Home
 _delay_ms(400);		//

  lcd_command( 0x06 );	// Cursor Auto-Increment
 _delay_us(50);		// mehr als 26,3µs warten

}

/* Funkcia zobrazi na pozicii kurzoru jeden znak */
/* Alias funkcia z dovodov kompatibility         */
void lcd_putc( char znak )
{
	lcd_data(znak);
}


/* Funkcia zobrazi na displeji nejaky text*/
void lcd_puts(char *string)
{
  /* ToDo: toto je vasa uloha */
}

/* Funkcia nastavi kurzor na poziciu riadok, stlpec */ 
/*   a text sa samozrejme vypise od kurzora dalej.  */
void lcd_setCursor(char row, char col)
{
  /* ToDo: aj toto je vasa uloha */
}

void lcd_clearline( unsigned char riadok )
{
 unsigned char index;
 lcd_setCursor( riadok, 0 );
 for (index=1; index<20; index++) lcd_data( ' ' );
}

void lcd_clear( void )
{
	lcd_clearline( 0 );
	lcd_clearline( 1 );
	lcd_clearline( 2 );
}

/* Funkcia zapne alebo vypne podsvietenie displeja */
void lcd_bklt( char OnOff)
{
  if (OnOff) 
     DISPLAY_BKLT_high;
  else
     DISPLAY_BKLT_low;
}

/* Ukazkovy program pre LCD displej */

/*
 * Blink.c   Ver 0.1  (10. 3. 2024 9:47:21)
 *
 * Minimal working example for the FEI STU
 * Function:
 * a) setup serial interface and prepare stdio.h
 * b) on-board LED blink
 *
 * Definitions:
 *              ATmega328P
 *              F_CPU 16000000UL
 *              BAUDRATE 9600
 *
 * Tato verzia nepodporuje printf s float aritmetikou!
 * Ak ju pozadujete, treba pre float treba navyse:
 *     Toolchain -> AVR/GNU C ->  Miscelanous -> Other Linker Flags: -Wl,-u,vfprintf  -lprintf_flt  
 *
 * Documentation: http://senzor.robotika.sk/mips/Blink
 * 
 */ 

#include <avr/io.h>
#include "uart.h"
#include "lcd.h"

#include <stdio.h>
FILE mystdout = FDEV_SETUP_STREAM(uart_putc, NULL, _FDEV_SETUP_WRITE);
                              
int main(void)
{
  hw_init();
 
  uart_init();
  
  lcd_init();
  
  stdout = &mystdout;           // printf() works from now

  printf("Hello, world! \n");
  
   lcd_puts("Hello, world!");
   
   lcd_setCursor(1,12);
   lcd_putc('X');
   lcd_putc(':');
   lcd_putc('1');
   lcd_putc('2');
   	    
   lcd_setCursor(2,0);
   lcd_puts("Ahoj, svet!");
   
   lcd_bklt(1);

  while(1)
  {
     //TODO:: Please replace this code with your application code 
  }
  
  return(0);
}

#include <Arduino.h>
#include <SPI.h>
#include <dogm_7036.h>
/*Available functions in dogm_7036 Libraray:
void initialize       (byte p_cs, byte p_si, byte p_clk, byte p_rs, byte p_res, boolean sup_5V, byte lines);
void string           (const char *str);
void ascii            (char character);
void position         (byte column, byte line);
void displ_onoff      (boolean on);
void cursor_onoff     (boolean on);
void define_char      (byte mem_adress, byte *dat);
void clear_display    (void);
void contrast         (byte contr);
*/

#define LED_D1 16
#define SW_A 17
#define SW_B 7
#define SW_C 8


// LCD Displej:
#define CLK 13   //(aka PB5)
#define SI 11    //(aka PB3)
#define RS 2     // (aka PD2)
#define CS 4     // (aka PD4)
#define BKLT 6   // (aka PD6)


dogm_7036 LCD;

int BL_pin       = 6; // BL je na pine D6

void init_backlight();
void mono_backlight(byte brightness);


void setup()
{
  init_backlight(); //use mono backlight in this sample code. Please change it to your configuration
//               CS,    RS
  LCD.initialize(CS,SI,CLK,RS,4,1,DOGM163);   //SS = 10, 0,0= use Hardware SPI, 9 = RS, 4 = RESET, 1 = 5V, EA DOGM163-A (=3 lines)
  LCD.displ_onoff(true);          //turn Display on
  LCD.cursor_onoff(true);         //turn Curosor blinking on


  LCD.clear_display();            //Clear the whole content
  LCD.position(1,1);              //set Position: first line, first character
  LCD.string("UAMT FEI STU");        //show String
  LCD.position(1,2);              //set Position: second line, first character
  LCD.string("5. aprila 2024");     
  LCD.position(1,3);              
  LCD.string("3 lines 16 char");   
  mono_backlight(255); //full
  
  delay(2000);
  
}

int con=0;
int mode=0;
int pod=0xff;

char buffer[16];
void loop()
{
  /* sem dame zmeny kontrastu a podsvietenia cez tlacitka */

  if ( digitalRead(SW_A)==0)
   if (mode)
       LCD.contrast(con--);
   else 
       mono_backlight(pod--);
  
  if ( digitalRead(SW_B)==0)
   if (mode)
       LCD.contrast(con++);
   else 
       mono_backlight(pod++);
  
  if (con<=0)  con =1;
  if (con>=63) con = 63;

  if (pod<=0)  pod = 1;
  if (pod>=255) pod = 255;

  
  if ( digitalRead(SW_C)==0)
    {  digitalWrite(LED_D1,HIGH);
      mode = !mode;
    }
    else
      digitalWrite(LED_D1,LOW);

              
  sprintf(buffer, "Podsviet: %02X   ", pod);
  LCD.position(1,2);              
           // 0123456789012345
  LCD.string(buffer);         

   sprintf(buffer, "Contrast: %02d   ", con);
  LCD.position(1,3);              
           // 0123456789012345
  LCD.string(buffer);         

   delay(100);

}


void init_backlight()
{
    pinMode(BL_pin,  OUTPUT);
    mono_backlight(255);
}

void mono_backlight(byte brightness)
{
  analogWrite(BL_pin, brightness);  
}