Operácie

Acrob041: Rozdiel medzi revíziami

Zo stránky SensorWiki

Balogh (diskusia | príspevky)
Balogh (diskusia | príspevky)
Bez shrnutí editace
Riadok 7: Riadok 7:
Sensor module TCS230LM contains the TAOS TCS230 Programmable Color Light-to-Frequency Converter (see datasheet). Sensor consists of an array of 8x8 photodiodes in groups of four. Each group contains Red, Green and Blue filtered photodiode. Fourth photodiode is clear, measuring an overall light intensity. Spectral responsivity of the photodiodes is on following chart:
Sensor module TCS230LM contains the TAOS TCS230 Programmable Color Light-to-Frequency Converter (see datasheet). Sensor consists of an array of 8x8 photodiodes in groups of four. Each group contains Red, Green and Blue filtered photodiode. Fourth photodiode is clear, measuring an overall light intensity. Spectral responsivity of the photodiodes is on following chart:


[[Súbor:TCS230spectralCharacteristics.png|center|height 200px]][[Súbor:TCS230spectralCharacteristicsWithLED.png|center]]
[[Súbor:TCS230spectralCharacteristics.png]][[Súbor:TCS230spectralCharacteristicsWithLED.png]]


Module used for measurement contains also a pair of white LEDs to achieve uniform lightning of the measured object. Sensor itself measures only light reflected by the object
Module used for measurement contains also a pair of white LEDs to achieve uniform lightning of the measured object. Sensor itself measures only light reflected by the object

Verzia z 12:51, 19. marec 2013

Color sensor TCS230

Sensor module TCS230LM contains the TAOS TCS230 Programmable Color Light-to-Frequency Converter (see datasheet). Sensor consists of an array of 8x8 photodiodes in groups of four. Each group contains Red, Green and Blue filtered photodiode. Fourth photodiode is clear, measuring an overall light intensity. Spectral responsivity of the photodiodes is on following chart:

Module used for measurement contains also a pair of white LEDs to achieve uniform lightning of the measured object. Sensor itself measures only light reflected by the object or light emitted by the light source e.g. LED. Output from the sensor is a frequency proportional to the intensity of the selected color. As the sensor contains only one light-to-frequency converter, it is necessary to select which color should be measured. This is accomplished simply by addressing an appropriate multiplexer input.



Documents: