Operácie

Acrob041: Rozdiel medzi revíziami

Zo stránky SensorWiki

Balogh (diskusia | príspevky)
Vytvorená stránka „== Color sensor TCS230 == Sensor module TCS230LM contains the TAOS TCS230 Programmable Color Light-to-Frequency Converter (see datasheet). Sensor consists of an array ...“
 
Balogh (diskusia | príspevky)
Bez shrnutí editace
Riadok 1: Riadok 1:
== Color sensor TCS230 ==
== Color sensor TCS230 ==


[[Súbor:TCS230_Principle.png|center]]


Sensor module TCS230LM contains the TAOS TCS230 Programmable Color Light-to-Frequency Converter (see datasheet). Sensor consists of an array of 8x8 photodiodes in groups of four. Each group contains Red, Green and Blue filtered photodiode. Fourth photodiode is clear, measuring an overall light intensity. Spectral responsivity of the photodiodes is on following chart:
Sensor module TCS230LM contains the TAOS TCS230 Programmable Color Light-to-Frequency Converter (see datasheet). Sensor consists of an array of 8x8 photodiodes in groups of four. Each group contains Red, Green and Blue filtered photodiode. Fourth photodiode is clear, measuring an overall light intensity. Spectral responsivity of the photodiodes is on following chart:
Riadok 15: Riadok 16:
Documents:
Documents:


* [Datasheet]
* [http://www.w-r-e.de/robotik/data/opt/tcs230.pdf Datasheet]
* [Module documentation]
* [http://www.parallax.com/dl/docs/prod/datast/TCS230.pdf TCS230 Module documentation] (parallax.com)

Verzia z 12:02, 19. marec 2013

Color sensor TCS230

Sensor module TCS230LM contains the TAOS TCS230 Programmable Color Light-to-Frequency Converter (see datasheet). Sensor consists of an array of 8x8 photodiodes in groups of four. Each group contains Red, Green and Blue filtered photodiode. Fourth photodiode is clear, measuring an overall light intensity. Spectral responsivity of the photodiodes is on following chart:

Module used for measurement contains also a pair of white LEDs to achieve uniform lightning of the measured object. Sensor itself measures only light reflected by the object or light emitted by the light source e.g. LED. Output from the sensor is a frequency proportional to the intensity of the selected color. As the sensor contains only one light-to-frequency converter, it is necessary to select which color should be measured. This is accomplished simply by addressing an appropriate multiplexer input.



Documents: