AVR ExampleT1pooled.c

/* Example 9.1. Timer counter 1 in timer mode - pooled version  */

#include <avr/io.h>

int main( void )
{
  /* *********************** Init device ************************************ */

    DDRB = 0x??;             // PORTB LED on PB2  is output
   PORTB = 0x??;             // LED Active low, LED off, No pull-ups

  TCCR1A = 0b????????;       // T/C1 in timer mode 
  TCCR1B = 0b????????;       // prescale ck 
   TCNT1 = 0x????;           // start value of T/C1 Low+High bytes
   TIFR1 = 0x01;             //(1<<TOV1);   if a 1 is written to a TOV1 bit
                             //             - the TOV1 bit will be cleared

  /* *********************** Main Loop ************************************** */

  do {

      if ( (TIFR1 & 0x01) == 0x01)  // If the overflow flag is set
      { 
	PORTB = PORTB ^ 0b????????; // Toggle the LED
        TCNT1 = 0x????;             // Restart T/C1 - reload
        TIFR1 = 0x01;               // Clear the overflow flag
       }
      else
        asm("nop");                 // Do nothing

  } while(1);                       // And do this forever


 return(0);
}

Návrat na cvičenie...