Interaktívna hracia doska: Rozdiel medzi revíziami
Zo stránky SensorWiki
Riadok 19: | Riadok 19: | ||
* Arduino Uno | * Arduino Uno | ||
[[Súbor:Hydro-uno.jpg]] | |||
* 3 striedavé vypínače | * 3 striedavé vypínače | ||
[[Súbor:Vypinac.jpg]] | |||
* 3 statické vypínače | * 3 statické vypínače | ||
* LED RGB modul Keyes 5050 | [[Súbor:Vypinac2.jpg]] | ||
* 3 LED RGB modul Keyes 5050 | |||
[[Súbor:led.jpg]] | |||
* DFPlayer Mini Mp3 modul | * DFPlayer Mini Mp3 modul | ||
[[Súbor:mp3module.jpg]] | |||
* Reproduktor | * Reproduktor | ||
[[Súbor:reproduktor.jpg]] | |||
* Doska | |||
[[Súbor:doska.png]] | |||
* Zdroj (externá batéria) | |||
* SD karta | * SD karta | ||
__TOC__ | __TOC__ |
Verzia z 10:02, 7. jún 2019
Autor: | Meno Priezvisko | |
Študijný odbor: | Aplikovaná informatika | 3. Bc. (2019) |
Opis projektu
Cieľom projektu je vytvoriť Interaktívnu hraciu dosku so stimulujúcimi podnetmi, určené pre deti so špecialnými potrebami.
Prečo?
- Osobný prínos: práca s Arduinom Uno a s jeho komponentmi
- Spoločenský prínos: Naučiť deti využívať vypínače v domácom prostredí, prostredníctvom našej interaktívnej hracej dosky
Komponenty dosky
Sem príde podrobný návod na výrobu.
- Arduino Uno
- 3 striedavé vypínače
- 3 statické vypínače
- 3 LED RGB modul Keyes 5050
- DFPlayer Mini Mp3 modul
- Reproduktor
- Doska
- Zdroj (externá batéria)
- SD karta
Analýza a výrobný proces
V tejto časti popíšete ako idete daný problém riešiť. Uvediete sem aj všetky potrebné technické údaje, ktoré sú potrebné na úspešné vyriešenie projektu. Napríklad:
- popis komunikačnej zbernice (i2c, 1-wire, RS-232 a pod.)
- obrázok zapojenia vývodov použitej súčiastky
- odkaz na katalógový list
- priebehy dôležitých signálov
- este jedna polozka
Popis riešenia
Sem opíšete ako konkrétne ste problém vyriešili. Začnite popisom pripojenia k procesoru (nezabudnite na schému zapojenia!) a zdôraznite ktoré jeho periférie ste pritom využili.
Pozn.: Názov obrázku musí byť jedinečný, uvedomte si, že Obr1.jpg už pred vami skúsilo nahrať už aspoň 10 študentov.
![](/sensorwiki/images/thumb/3/31/MojObrazok.jpg/250px-MojObrazok.jpg)
Algoritmus a program
Algoritmus pre našu dosku.
/*******************************************************************************
* DFPlayer_Mini_Mp3, This library provides a quite complete function for *
* DFPlayer mini mp3 module. *
* www.github.com/dfrobot/DFPlayer_Mini_Mp3 (github as default source provider)*
* DFRobot-A great source for opensource hardware and robot. *
* *
* This file is part of the DFplayer_Mini_Mp3 library. *
* *
* DFPlayer_Mini_Mp3 is free software: you can redistribute it and/or *
* modify it under the terms of the GNU Lesser General Public License as *
* published by the Free Software Foundation, either version 3 of *
* the License, or any later version. *
* *
* DFPlayer_Mini_Mp3 is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU Lesser General Public License for more details. *
* *
* DFPlayer_Mini_Mp3 is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU Lesser General Public License for more details. *
* *
* You should have received a copy of the GNU Lesser General Public *
* License along with DFPlayer_Mini_Mp3. If not, see *
* <http://www.gnu.org/licenses/>. *
* *
******************************************************************************/
/*
* Copyright: Rhydolabz
* name: DFPlayer_Mini_Mp3 sample code
* Author: leff <>
* Date: 2015-5-29
* Description: connect DFPlayer Mini by SoftwareSerial, this code is test on Uno
**Wire: **Board : Uno
*Pin10 - player TX;
*Pin11 - player RX;
*pin3 - player BUSY
* Note: the mp3 files must put into mp3 folder in your tf card
*/
/***************************************************
DFPlayer - A Mini MP3 Player For Arduino
<https://www.dfrobot.com/index.php?route=product/product&product_id=1121>
***************************************************
This example shows the basic function of library for DFPlayer.
Created 2016-12-07
By [Angelo qiao](Angelo.qiao@dfrobot.com)
GNU Lesser General Public License.
See <http://www.gnu.org/licenses/> for details.
All above must be included in any redistribution
****************************************************/
/***********Notice and Trouble shooting***************
1.Connection and Diagram can be found here
<https://www.dfrobot.com/wiki/index.php/DFPlayer_Mini_SKU:DFR0299#Connection_Diagram>
2.This code is tested on Arduino Uno, Leonardo, Mega boards.
****************************************************/
#include "Arduino.h"
#include "SoftwareSerial.h"
#include "DFRobotDFPlayerMini.h"
SoftwareSerial mySoftwareSerial(12, 13); // RX, TX
DFRobotDFPlayerMini myDFPlayer;
void printDetail(uint8_t type, int value);
const int buttonSound_1_Pin = 9;
const int buttonSound_2_Pin = 10;
const int buttonSound_3_Pin = 11;
const int buttonRed_Pin = 5;
const int buttonGreen_Pin = 4;
const int buttonBlue_Pin = 3;
const int button2Pin = 8; //LED BUTTON
//const int redPin = 7;
int buttonSound_1_State = 0;
int buttonSound_2_State = 0;
int buttonSound_3_State = 0;
int buttonRed_State = 0;
int buttonGreen_State = 0;
int buttonBlue_State = 0;
int button2State = 0;
int red_Pin= 8;
int green_Pin = 6;
int blue_Pin = 7;
boolean counter = true;
void setup()
{
// initialize the pushbutton pin as an input:
pinMode(buttonSound_1_Pin, INPUT);
pinMode(buttonSound_2_Pin, INPUT);
pinMode(buttonSound_3_Pin, INPUT);
pinMode(buttonRed_Pin, INPUT);
pinMode(buttonGreen_Pin, INPUT);
pinMode(buttonBlue_Pin, INPUT);
pinMode(red_Pin, OUTPUT);
pinMode(green_Pin, OUTPUT);
pinMode(blue_Pin, OUTPUT);
mySoftwareSerial.begin(9600);
Serial.begin(115200);
if (!myDFPlayer.begin(mySoftwareSerial)) { //Use softwareSerial to communicate with mp3.
while(true);
}
// myDFPlayer.volume(30); //Set volume value. From 0 to 30
}
void loop()
{
static unsigned long timer = millis();
/*****************BUTTON STATE BEGIN**********************/
buttonSound_1_State = digitalRead(buttonSound_1_Pin);
buttonSound_2_State = digitalRead(buttonSound_2_Pin);
buttonSound_3_State = digitalRead(buttonSound_3_Pin);
buttonRed_State = digitalRead(buttonRed_Pin);
buttonGreen_State = digitalRead(buttonGreen_Pin);
buttonBlue_State = digitalRead(buttonBlue_Pin);
/*****************BUTTON STATE END**********************/
/*****************COLOR BEGIN**********************/
if(buttonRed_State == LOW){
setColor(255,0,0);
} else {
setColor(0,0,0);
}
if(buttonGreen_State == LOW){
setColor(0,255,0);
} else {
setColor(0,0,0);
}
if(buttonBlue_State == LOW){
setColor(0,0,255);
} else {
setColor(0,0,0);
}
/*****************COLOR END**********************/
/*****************SOUND BEGIN**********************/
// check if the pushbutton is pressed. If it is, the buttonState is HIGH:
if (buttonSound_1_State == 1) {
if (millis() - timer > 1500) {
timer = millis();
myDFPlayer.volume(30); //Set volume value. From 0 to 30
myDFPlayer.play(1); //Play the first mp3 //krava
}
}
if (buttonSound_2_State == 1) {
if (millis() - timer > 1500) {
timer = millis();
myDFPlayer.volume(20); //Set volume value. From 0 to 30
myDFPlayer.play(2); //Play the first mp3 //kohut
}
}
if (buttonSound_3_State == 1) {
if (millis() - timer > 1500) {
timer = millis();
myDFPlayer.volume(15); //Set volume value. From 0 to 30
myDFPlayer.play(3); //Play the first mp3 //macka
}
}
/*****************SOUND END**********************/
}
void setColor(int redValue, int greenValue, int blueValue) {
digitalWrite(red_Pin, redValue);
digitalWrite(green_Pin, greenValue);
digitalWrite(blue_Pin, blueValue);
}
Výsledok
Nezabudnite zdokumentovať výsledok vašej práce. Určite sem patria fotografie, video a zhodnotenie ako ste spokojní s výsledkom,
Kľúčové slová 'Category', ktoré sú na konci stránky nemeňte.