AVR Example T1 counter

Tento program pouzije D5 (arduino) ako pocitadlo. Mozne pripojit tlacitko, alebo 555 a pocitat pocet impulzov.

Vstavany terminal Arduina nema formatovanie, takze treba pouzit iny terminal aby sa to pekne vypisovalo:

#define SWITCH 5                 // select the pin for Switch

void setup()
{
 pinMode(SWITCH, INPUT);        // this pin is an INPUT
 TCNT1 = 0x00;
 TCCR1B = 0x07; // timer1 clock = external clock source on pin T1, rising edge

 Serial.begin(9600);
 Serial.println("Button test:");
}

void loop()                      // endless loop
{
 Serial.print("Input D5 = ");
 Serial.print(digitalRead(SWITCH),BIN);
 Serial.print("  TCNT1 = ");
 Serial.print(TCNT1,DEC);
 Serial.print('\r');             // nefunguje so vstavanym, 
                                 // ale je OK s putty terminalom
 delay(250);                     // wait 1/4s for another
}