AVR ExamplePWMgenerator.c: Rozdiel medzi revíziami

Aktuálna revízia z 08:21, 9. november 2012

/* ******************************************************** */
/* Example 10.1. Timer counter 1 as a PWM generator         */
/*                                                          */
/* Warning: The values are NOT CORRECT, they should be re-  */
/*          placed by students themselves!!!                */
/* ******************************************************** */

int main(void) {

  /* *********************** Init device ******************************** */

    DDRB = 0b00000000;       // 
   PORTB = 0b00000000;       // 

    DDRC = 0b00000000;       // 
   PORTC = 0b00000000;       // 

  /* *********************** Init T1 as a PWM generator *************************** */

  TCCR1A = 0b00000000;       // Mode: PWM, Phase Correct, 9-bit
  TCCR1B = 0b00000000;       // Prescaler 1:1024
   OCR1A = 000;              // Initialization values          
   OCR1B = 000;              // for 1:1 duty cycle
   TCNT1 = 0;           
              

for (;;);
         

}

Návrat na cvičenie...

@@ Riadok 2: / Riadok 2: @@
 /* ******************************************************** */
 /* Example 10.1. Timer counter 1 as a PWM generator         */
-/* Modulates LED connected on PB5, SW1 and SW2 changes duty */
+/*                                                          */
-/* SW3 and 4 control the red LED                            */
 /* Warning: The values are NOT CORRECT, they should be re-  */
 /*          placed by students themselves!!!                */
 /* ******************************************************** */
-#include <avr\io.h>
-#define SW1 0
-#define SW2 1
-#define SW3 2
-#define SW4 3
-#define RedLED 5
 int main(void) {
-   /* *********************** Init device MiniMEXLE ******************************** */
+   /* *********************** Init device ******************************** */
-     DDRB = 0b00000000;       // PORTB: PWM - PB1, PB2 (LED)  is output, PB6, 7 IN!!!
+     DDRB = 0b00000000;       //
-    PORTB = 0b00000000;       // LED Active low, LED off, No pull-ups
+    PORTB = 0b00000000;       //
-     DDRC = 0b00000000;       // PORTC LED on PC5  is output, SW1-4 are inputs
+     DDRC = 0b00000000;       //
-    PORTC = 0b0000000;       // LED Active high, LED off, pull-ups ON
+    PORTC = 0b00000000;       //
    /* *********************** Init T1 as a PWM generator *************************** */
@@ Riadok 36: / Riadok 26: @@
-for (;;) {
+for (;;);
-	      if( bit_is_clear(PINC, SW1)) {  // Switch 1
-              OCR1A += 32;                    // Increment OCR
-              OCR1B += 32;
-              loop_until_bit_is_set(PINC, SW1);
-                }
-	      if(bit_is_clear(PINC, SW2)){   // Switch 2
-              OCR1A -= 32;                   // Decrement OCR
-  	      OCR1B -= 32;
-              loop_until_bit_is_set(PINC, SW2);
-                }
-              if(bit_is_clear(PINC, SW3)){   // Switch 3
-              PORTC |= (1<<RedLED);          // Red LED ON
-              loop_until_bit_is_set(PINC, SW3);
-                }
-              if(bit_is_clear(PINC, SW4)) {  // Switch 4
-              PORTC &= ~(1<<RedLED);         // Red LED OFF
- 	      loop_until_bit_is_set(PINC, SW4);
-                }
-          }
 }

AVR ExamplePWMgenerator.c: Rozdiel medzi revíziami

Zo stránky SensorWiki

Aktuálna revízia z 08:21, 9. november 2012